NETGEAR RT338 Reference Manual page 172

Reference Guide for the Model RT338 ISDN Router
You can enable the following types of syslog messages:
• Call detail record (CDR)
• Filter log
• PPP log
• Packet trigger
• Voice call (POTS) log
To configure the router for logging with the syslogd program on a local host:
Go to Menu 24.3.2 - System Maintenance - UNIX Syslog and Accounting.
1.
Set Active to Yes
2.
In the Syslog IP Address field, enter the IP address of the syslogd host PC.
3.
Select a number for Log Facility.
4.
You can choose any facility number, but the syslogd program must be set to the same number.
Select the message types to be logged, and save this menu.
5.
To configure the syslogd program on the local host PC:
Edit /etc/syslog.conf to add the line:
1.
localn.*
for example:
local6.*
In the syslogd startup script, add the -r option to enable logging from a remote host.
2.
11-8
/name_of_log_file
/var/log/rt338.log
System Maintenance