Figure 7-2. Menu 11.1 - Remote Node Profile - NETGEAR RT338 Reference Manual

To create a remote node:
Enter 11 from the Main Menu to display Menu 11 - Remote Node Setup.
1.
Enter a remote node number (1 to 8) to edit the remote node and to display Submenu
2.
11.1 - Remote Node Profile.
Menu 11.1 - Remote Node Profile opens as shown in
Rem Node Name= ?
Active= Yes
Call Direction= Both
Incoming:
Rem Login= ?
Rem Password= ?
Rem CLID=
Call Back= No
Outgoing:
My Login=
My Password= ********
Authen= CHAP/PAP
Pri Phone #= ?
Sec Phone #=
Figure 7-2. Menu 11.1 - Remote Node Profile
Edit the remote node settings with the desired changes.
3.
At the bottom of Menu 11.1, press Enter to save Menu 11.1.
4.
Press [Esc] at any time to cancel your selections.
Remote Node Configuration
Menu 11.1 - Remote Node Profile
Press ENTER to Confirm or ESC to Cancel:
Reference Guide for the Model RT338 ISDN Router
Figure
Edit PPP Options= No
Rem IP Addr= ?
Edit IP= No
Telco Option:
Transfer Type= 64K
Allocated Budget(min)=
Period(hr)=
Carrier Access Code=
Nailed-Up Connection= N/A
Toll Period(sec)= 0
Session Options:
Edit Filter Sets= No
Idle Timeout(sec)= 300
7-2.
7-3