Table 9-1. Filter Rules Summary Abbreviations; Table 9-2. Filter Type Ip Abbreviations; Table 9-3. Filter Type Gen Abbreviations - NETGEAR RT338 Reference Manual

Reference Guide for the Model RT338 ISDN Router
For more information about filter rules, see
Table 9-1. Filter Rules Summary Abbreviations
Abbreviation Description
# Refers to the filter rule number (1–6).
A Refers to Active. Y means the filter rule is active, and N means the filter rule is
inactive.
Type Refers to the type of filter rule and can display GEN for generic or IP for TCP/IP.
Filter Rules The filter rule parameters are displayed here.
M Refers to More. Y means there are more rules to check. N means there are no rules to
check.
m Refers to Action Matched. F means to forward the packet, D means to drop the
packet, and N means to check the next rule.
n Refers to Action Not Matched. F means to forward the packet, D means to drop the
packet, and N means to check the next rule.
If the filter type is IP (TCP/IP), the abbreviations listed in
Table 9-2. Filter Type IP Abbreviations
Abbreviation Description
Pr Protocol
SA Source Address
SP Source Port number
DA Destination Address
If the filter type is GEN (generic), the abbreviations listed in
Table 9-3. Filter Type GEN Abbreviations
Abbreviation Description
Off Offset
Len Length
To configure a specific filter rule, select the number of the filter rule (1–6) that you want
4.
to configure and press [Enter] to display Menu 21.1.1 - TCP/IP Filter Rule.
9-4
"Configuring a Filter
Table 9-2
Table 9-3
Rule," on page 9-5.
are used.
are used.
Configuring Filters