Figure 3-2. Hyperterminal Connect To Dialog Box - NETGEAR RT338 Reference Manual

Reference Guide for the Model RT338 ISDN Router
Enter a descriptive name for the connection in the Name text box of the New Connection
3.
dialog box.
The example in Figure 3-1
text as the file name when you save the connection information in a session file.
Click OK.
4.
The Connect To dialog box opens, as shown in
Figure 3-2. HyperTerminal Connect To Dialog Box
In the Connect Using box, choose either COM1 or COM2 depending on which serial port
5.
you connected the router to.
3-8
shows "RT338" as the connection name. HyperTerminal uses this
Figure 3-2.
Preparing Your Network