Connecting The Model Rt338 Router To A Hub Or Switch; Connecting A Telephone, Fax Machine, Or Modem; Connecting The Power Adapter - NETGEAR RT338 Reference Manual

Connecting the Model RT338 Router to a Hub or Switch

To connect the router to a hub or switch:
• Connect the LAN port of the Model RT338 router to a hub or switch using the white
straight-through Ethernet cable that is included with your router.
You can connect the Model RT338 router to a 10Mbps or 100Mbps hub or switch port.
The router senses the speed of the connected port and automatically sets its speed to match.

Connecting a Telephone, Fax Machine, or Modem

To connect the router to a telephone, fax machine, or modem:
• Use either one of the phone ports (PHONE 1 or PHONE 2) for connecting your router to
an analog telephone, fax, or modem.
Be sure that the ISDN line provided by your telephone company is capable of both data and
voice calls.

Connecting the Power Adapter

To connect the router to the power adapter:
Plug the connector of the power adapter into the 12 V DC adapter outlet on the rear
1.
panel of the router.
Plug the other end of the adapter into a standard wall outlet.
2.
Installing and Connecting the Router
Reference Guide for the Model RT338 ISDN Router
2-7