Index - NETGEAR RT338 Reference Manual

A
accounting function, 11-7
Action Matched/Not Matched field
Generic Filter Rule menu, 9-8
TCP/IP Filter Rule menu, 9-7
Active field
Add/Modify Static Route tab, 5-29
Edit Dial-in User, 8-7
Edit IP Static Route menu, 7-17
Generic Filter Rule menu, 9-7
Remote Node Profile menu, 5-21, 7-4
Syslog and Accounting menu, 11-7
TCP/IP Filter Rule menu, 9-5
Additional Call Offering (ACO), 3-1
Address Resolution Protocol, 1-14
Advanced Setup menu bar commands, 5-11
Advanced Setup window, 5-9
Analog Call field, ISDN Setup menu, 4-9
analog voice ports, 1-3
applications information, xxi
B
B Channel Usage field, ISDN Setup menu, 4-9
BACP, 7-8
Bandwidth Allocation Control Protocol, 7-9
Bandwidth on Demand, 7-9
Base Transmission Rate, 7-9
blacklist function, 11-16
budget management, 11-16

Index

C
cables, 2-6
call bumping, 3-1
call control, 11-16
Call Direction field, Remote Node menu tab, 5-21
Call Direction field, Remote Node Profile menu, 7-4
Callback Budget Management field, Default Dial-in
Setup, 8-4
Callback field, Edit Dial-in User, 8-7
callback function, 1-5
calling line identification, 1-5
CHAP authentication, 1-5, 7-5, 8-3
Cisco mutual authentication, 8-3
command interpreter mode, 11-15
command-line mode, 11-9
compression, 1-2
Compression field, PPP Detail tab, 5-24
Compression field, Remote Node PPP Options menu,
7-8
configuration
automatic by DHCP, 1-4
backup, 11-12
connecting
cables, 2-6
devices, 2-7
power, 4-4
serial port, 3-6
through Telnet session, 3-12
conventions, xx
Country Code field, System Maintenance menu, 11-3
customer support, iii
Index
1