Selecting Tcp/Ip Detail On The Remote Node Tab; Figure 5-12. Tcp/Ip Detail Tab - NETGEAR RT338 Reference Manual

Selecting TCP/IP Detail on the Remote Node Tab

Click on the TCP/IP Detail button on the Remote Node tab to open the TCP/IP Detail tab shown in
Figure 5-12.
Figure 5-12. TCP/IP Detail Tab
Table 5-9 lists and describes the fields of the TCP/IP Detail tab.
Table 5-9. TCP/IP Detail Tab
Field
Remote IP Address
Rem Subnet Mask
Using FirstGear to Configure Internet Access
Description
This read-only field shows the IP address you entered for this remote node in the
previous menu.
This field displays the standard class netmask for the network address of the
remote router. If the remote network uses a netmask other than the standard
class netmask, you must enter the netmask here.
Reference Guide for the Model RT338 ISDN Router
5-25