Figure 9-3. Menu 21.3 - Filter Rules Summary - NETGEAR RT338 Reference Manual

Select the filter that you want to configure or choose an unused set to create a new filter.
2.
In order to distinguish between the 12 filter sets, each filter set should have a name or
description. When you select a set for editing, you are prompted to provide descriptive text to
be displayed in the comment field of Menu 21 next to the filter number.
When you have finished filling in the Edit Comments field, press [Enter] at the Press
3.
ENTER to Confirm... prompt to confirm your selections, or press [Esc] at any time to
cancel your selections.
The new information is displayed in the read-only section of Menu 21 - Filter Set
Configuration.
When you press [Enter], a Filter Rules Summary menu opens as shown in
The menu number reflects the number of the rule that you selected to configure.
# A Type
- - ---- --------------------------------------------------------------- - - -
1 N
2 N
3 N
4 N
5 N
6 N
Enter Filter Rule Number (1-6) to Configure:
Figure 9-3. Menu 21.3 - Filter Rules Summary
The information in this menu is read-only; the parameters of each rule that you configured for
that set are displayed. Refer to
Menu 21.3 - Filter Rules Summary.
Configuring Filters
Menu 21.3 - Filter Rules Summary
Filter Rules
Table 9-1, Table
Reference Guide for the Model RT338 ISDN Router
9-2, and Table 9-3
Figure 9-3.
M m n
for abbreviations used in
9-3