Editing Ppp Options; Figure 7-3. Menu 11.2 - Remote Node Ppp Options - NETGEAR RT338 Reference Manual

Editing PPP Options

To edit PPP options:
Select Yes in the Edit PPP Options field of Submenu 11.1 - Remote Node Profile.
1.
Press [Enter] to display Menu 11.2 - Remote Node PPP Options.
2.
Menu 11.2 - Remote Node PPP Options opens as shown in
Figure 7-3. Menu 11.2 - Remote Node PPP Options
Edit the options described in Table 5-2.
3.
Press [Enter] at the Press ENTER to Confirm... prompt to confirm your selections, and
4.
return to the previous menu.
Press [Esc] at any time to cancel your selections.
Continue to the end of Menu 11.1, and press [Enter] to save the selections you made in
5.
Menu 11.2.
Remote Node Configuration
Menu 11.2 - Remote Node PPP Options
Encapsulation= Standard PPP
Compression= No
BACP= Enable
Multiple Link Options:
BOD Calculation= Transmit or Receive
Base Trans Rate(Kbps)= 64
Max Trans Rate(Kbps)= 64
Target Utility(Kbps)= 32-48
Add Persist(sec)= 5
Subtract Persist(sec)= 5
Press ENTER to Confirm or ESC to Cancel:
Reference Guide for the Model RT338 ISDN Router
Figure 7-3.
7-7