Configuring The Manager Password - NETGEAR RT338 Reference Manual

Reference Guide for the Model RT338 ISDN Router

Configuring the Manager Password

The internal Manager interface of the Model RT338 router is protected by a Manager password.
The factory default Manager password is 1234.
To change the Manager password:
Select option 23 (System Security) from the Main Menu to display Menu 23 - System
1.
Security.
Select option 1 (Change Password) to display the Change Password screen.
2.
Enter your previous Manager password and press [Enter].
3.
Enter your new Manager password and press [Enter].
4.
Enter your new Manager password again for confirmation and press [Enter].
5.
You must enter this new password when you want to access the Manager through the serial port or
by a Telnet connection.
If you lose or forget the Manager password, you must clear the configuration of the router as
described in this chapter. Clearing the configuration causes the Manager password to revert to the
factory default, 1234.
11-18 System Maintenance