Choosing Between The Setup Wizard And Advanced Setup; Starting Firstgear - NETGEAR RT338 Reference Manual

Choosing Between the Setup Wizard and Advanced Setup

After you have found and selected a router using FirstGear, choose either the Setup Wizard or the
Advanced Setup option:
• Choose the Setup Wizard option to configure basic Internet access applications in which your
network only dials out to an ISP. The Setup Wizard interface consists of a wizard that leads
you through various menus and asks for basic information.
• Choose the Advanced Setup option to customize more advanced aspects of the configuration
and to save configuration files to your PC. Using the Advanced Setup menus, you can
configure your router for dialing to multiple remote locations. For more complex applications
than this, NETGEAR recommends that you use the internal Manager interface.
Refer to Chapter 5, "Using FirstGear to Configure Internet
the router with FirstGear.

Starting FirstGear

Before starting FirstGear, verify that the router is properly connected to your Ethernet network and
that the router has had power turned on for at least one minute.
To start the FirstGear Setup Wizard:
• From the Windows Taskbar, click Start and choose Programs > FirstGear for RT338 > Setup
Wizard
To start FirstGear Advanced Setup:
• From the Windows Taskbar, click Start and choose Programs > FirstGear for RT338 >
Advanced Setup
When you start FirstGear, it searches the attached LAN for the Model RT338 router. If FirstGear
does not find a Model RT338 router, it displays an alert box.
Initial Router Configuration
Reference Guide for the Model RT338 ISDN Router
Access" for instructions on configuring
4-3