Figure 6-3. Ip Static Routing Table Example - NETGEAR RT311 Reference Manual

Reference Guide for the Model RT311 and RT314 Internet Access Gateway Routers
Press [Enter].
4.
The command interpreter displays the static IP routing table as shown in the example in
Figure 6-3.
ras> ip rout stat
Dest FF Len Interface
192.168.0.0 00 24
default 00 0
ras>
Figure 6-3. IP Static Routing Table Example
In this example, the first route shown is the local Ethernet subnet connected to the LOCAL
interface (enif0). The second route is the default route, through the INTERNET interface
(enif1). All traffic from the LAN to a destination outside the LAN will be sent to the default
route and will be handled by the ISP.
After viewing the table, type "exit" to return to the menus.
5.
To create additional static routes for IP:
In the Manager interface, open Menu 12 - IP Static Route Setup.
1.
Select an unused number from the menu and press [Enter].
2.
Menu 12.1 - Edit IP Static Route opens as shown in
6-6
Gateway
enif0 192.168.0.1
enif1 10.118.18.1
Using the Manager Interface to Configure the Router for Internet Access
Metric stat Timer Use
1 041b 0 0
1 001b 0 0
Figure 6-4.