Juniper M7i Hardware Manual page 73

Table 36: PICs Supported in the M7i Router (continued)
PIC Family and Type
DS3, E1, E3, and T1
DS3/E3 Enhanced IQ (IQE) PIC
(M7i Router)
E1 PIC (M7i Router)
E3 IQ PIC (M7i Router)
Ethernet
Fast Ethernet PICs (M7i Router)
Gigabit Ethernet PIC with SFP (M7i
Router)
Ethernet Enhanced IQ2 (IQ2E)
Gigabit Ethernet Enhanced IQ2
(IQ2E) PIC with SFP (M7i Router)
Services
Multiservices 100 PIC (M7i Router)
Tunnel Services PIC (M7i Router)
Serial
EIA-530 PIC (M7i Router)
Copyright © 2019, Juniper Networks, Inc.
Ports Model Number
4 PE-4DS3-E3-IQE-BNC
4 PE-4E1-RJ48
4 PE-4E3-QPP
4 PE-4FE-TX
1 PE-1GE-SFP
4 PE-4GE-TYPE1-SFP-IQ2E
0 PE-MS-100-1
0 PE-TUNNEL
2 PE-2EIA530
Chapter 6: Line Card Components and Descriptions
Connector
Standard DS3 BNC coaxial cable
interfaces
Four RJ-48 connectors (one per
port)
Standard DS3 BNC coaxial cable
interfaces
Two-pair, Category 5 unshielded
twisted-pair connectivity through
an RJ-45 connector
Pinout: MDI noncrossover
Optical: LC/PC
Copper: RJ-45
Four-pair, Category 5 shielded
twisted-pair connectivity
Pinout: MDI crossover
Optical: LC/PC
Copper: RJ-45
Four-pair, Category 5 shielded
twisted-pair connectivity
Pinout: MDI crossover
None
None
Two DB-25 male connectors (one
per port, included with PIC)
V.35 requires an EIA-530 to V.35
cable and connects to a V.35 DTE
34-pin Winchester type male
cable (one per port)
X.21 requires an EIA-530 to X.21
cable and connects to a X.21 DTE
DB-15 male cable
First
Junos OS
Release
Support
10.2
6.0
6.1
6.0
6.3
9.4
8.1
6.0
6.0
49