Juniper M7i Hardware Manual page 156

M7i Multiservice Edge Router Hardware Guide
Related
Documentation
132
Optionally, configure additional properties by adding the necessary configuration
12.
statements. Then commit the changes to activate them on the router.
[edit]
root@host# commit
When you have finished configuring the router, exit configuration mode.
13.
[edit]
root@host# exit
root@host>
NOTE: To reinstall the Junos OS, you boot the router from the removable
media. Do not insert the removable media during normal operations. The
router does not operate normally when it is booted from the removable media.
When the router boots from the storage media (removable media, internal CompactFlash
card, or hard disk) it expands its search in the
for the following files in the following order:
(the rescue configuration file), and
rescue.conf
configuration file). When the search finds the first configuration file that can be loaded
properly, the file loads and the search ends. If none of the file can be loaded properly,
the routing platform does not function properly. If the router boots from an alternate
boot device, the Junos OS displays a message indication this when you log in to the router.
M7i Router Description on page 3
Overview of M7i Router Installation on page 103
/config directory of the routing platform
(the main configuration file),
juniper.conf
(the first rollback
juniper.conf.1
Copyright © 2019, Juniper Networks, Inc.