Juniper M7i Hardware Manual page 151

Copyright © 2019, Juniper Networks, Inc.
user@host> request system halt
NOTE: Wait until a message appears on the console confirming that the
operating system has halted.
For more information about the command, see the
NOTE: The CFEB might continue forwarding traffic for approximately 5
minutes after the request system halt command has been issued.
Press the power switch on each power supply faceplate to the
2.
Shut down power to the router by pressing the power switch for all power supplies to
3.
the off ( ) position. On both AC and DC power supplies, the switch is located on the
O
power supply faceplate.
Chapter 19: Providing Power to the M7i
.
CLI Explorer
( ) position.
OFF O
127