Removing The Pc Card; Figure 54: Removing The Pc Card - Juniper M7i Hardware Manual

M7i Multiservice Edge Router Hardware Guide

Removing the PC Card

See Also
156
To remove and insert a PC card, perform the following procedures:
Removing the PC Card on page 156
Replacing the PC Card Adapter Flash Disk on page 157
Inserting the PC Card on page 157
The PC card is inserted in the slot labeled
remove the PC card (see Figure 54 on page
Press the eject button located to the right of the PC card slot in the Routing Engine
1.
faceplate.
When the PC card pops partially out of the slot, grasp the card and pull it straight out
2.
of the slot.

Figure 54: Removing the PC Card

M7i Chassis Description on page 11
M7i Midplane Description on page 12
Maintaining the M7i Routing Engine on page 192
Replacing the PC Card Adapter Flash Disk on page 147
Inserting the PC Card on page 157
PC CARD in the Routing Engine faceplate. To
156):
Copyright © 2019, Juniper Networks, Inc.