Table of Contents
Advertisement
4 - 22
5a
K
P
Fig. 26
Potentiometer for angulation drive
•
Couple the LITHOSTAR MODULARIS to the SIREMOBIL Iso-C.
•
Adjust the C-arm to 0°.
•
Open the cover of the angulation drive (Fig. 26).
•
Desolder the cables at the potentiometer (P/Fig. 26); when doing this, record the color
coding of the cables to the potentiometer connections to ensure correct reconnection.
•
Remove the old potentiometer completely (P/Fig. 26).
•
Install and solder the new potentiometer.
•
Set the potentiometer to 500 ± 10 ohms or 5.0 ± 0.1 volts (center position).
The potentiometer setting can also be checked with the Service PV (Chapter 3).
•
Tighten the toothed belt.
•
Perform C-arm adjustment as described on page 3- 10.
•
Reattach the covers.
MODULARIS Uro Plus
LITHOSTAR MODULARIS
4
5
Fig. 27
SPL1-130.840.02
Rev. 03
04.05
6
Page 22 of 34
CS PS 24
Medical Solutions
4
Siemens AG
Advertisement
Table of Contents
