Table of Contents
Advertisement
Service software
English Windows 95 / 98 / NT
Generate and switch on connection between Service PC and the D3.X9 (com 3 Service) board
Open the Hyper Terminal Program (located under "Windows" - "Accessories")
Click on Hypterm.exe
In the window" Connection Description "
for the name: enter Litho ; for the icon: select one and click OK
In the window "Connect To " select : com1 or com2 and click OK
Enter the following settings in the window:
Bits per second: 9600, Data bits: 8, Parity: none,
1
Stop bits: 2, Flow control: None, and click OK
Save the data
to drive c: or a:
Set switch S2 on board D3 back to normal and remove the connection cable
*Additional Information: In order to save the information from LITHOSTAR MODULARIS, it is best to save the
desired file as a text file. Basic procedure: open Windows Explorer, open the folder e.g. Temp, then click on the
"File" menu and click on New / Text file and enter the name for the text file.
Siemens AG
Medical Solutions
in LITHOSTAR MODULARIS
Set switch S2 on board D3 to service
Yes
connection ?
New
Yes
board?
Yes
No
Press the "H" key to display the text
Perform the desired tasks (refer to pages 3-4 to 3-10 )
Then in the Transfer menu, select Capture Text and select Stop
In the File menu, click Exit
Enter the appropriate response to the other queries
End
SPL1-130.840.02
Rev. 03
First time
No
Open the existing connection, e.g. Litho.ht
Perform software download - page 3-13
In the Transfer menu, select Capture Text..*
In the window " Capture Text " accept the file path indicated or
search for the desired file path with Browse.. and click Start
Page 3 of 18
04.05
CS PS 24
3 - 3
3
MODULARIS Uro Plus
Advertisement
Table of Contents
