Siemens MODULARIS Uro Plus Service Instructions Manual page 86

6 - 4
Fig. 7
•
Make the following basic settings on the ultrasound unit:
Value:
5
(Fig. 7)
35 dB (Fig. 7)
•
Set all slide controls all the wayto the left.
•
The image flip key
•
The corresponding ultrasound probe is selected on switching on. If a second ultrasound
probe is present, then select the probe with the
•
Check that the ultrasound arm is as shown in Fig. 1, if not align it.
The longitudinal groove must be visible (1/Fig. 8).
MODULARIS Uro Plus
Setting with:
Set trackball to Edge FV
(white background)
then press and
set value with
"Select" controller.
Set trackball to DR DR
(white background)
then press and
set value with
"Select" controller.
must not be selected.
SPL1-130.840.02
Rev. 03 04.05
Iso-center with ultrasound
Fig. 8
German English
Edge Côté
Dyn Rng DR
key.
Page 4 of 16
CS PS 24
1
French Spanish
Contorno
Cam Din
Siemens AG
Medical Solutions