Table of Contents
Advertisement
40000013-00000000 • 40000018-00000000
and password are being used.
40000013-00000000
Remote access attempt failed.
Invalid userid or password received.
Userid is [arg1] from TELNET client at
IP address [arg2].
Explanation: This message is for the use case where
a user has failed to log in to a Management Controller
from a telnet session.
Internal Event: No
Severity: Info
Alert Category: System - Remote Login
Serviceable: No
CIM Information: Prefix: IMM and ID: 0019
SNMP Trap ID: 30
Automatically notify Support: No
User response: Make sure that the correct login ID
and password are being used.
40000014-00000000
The [arg1] on system [arg2]
cleared by user [arg3].
Explanation: This message is for the use case where
a Management Controller Event Log on a system is
cleared by a user.
Internal Event: No
Severity: Info
Alert Category: none
Serviceable: No
CIM Information: Prefix: IMM and ID: 0020
SNMP Trap ID:
Automatically notify Support: No
User response: Information only; no action is
required.
40000015-00000000
Management Controller [arg1]
reset was initiated by user [arg2].
Explanation: This message is for the use case where
a Management Controller reset is initiated by a user.
Internal Event: No
Severity: Info
Alert Category: none
Serviceable: No
CIM Information: Prefix: IMM and ID: 0021
SNMP Trap ID:
Automatically notify Support: No
34
System x iDataPlex dx360 M4 Types 7912 and 7913: Problem Determination and Service Guide
User response: Information only; no action is
required.
40000016-00000000
ENET[[arg1]]
DHCP-HSTN=[arg2], DN=[arg3],
IP@=[arg4], SN=[arg5], GW@=[arg6],
DNS1@=[arg7] .
Explanation: This message is for the use case where
a Management Controller IP address and configuration
has been assigned by the DHCP server.
Internal Event: No
Severity: Info
Alert Category: none
Serviceable: No
CIM Information: Prefix: IMM and ID: 0022
SNMP Trap ID:
Automatically notify Support: No
User response: Information only; no action is
required.
40000017-00000000
ENET[[arg1]]
IP-Cfg:HstName=[arg2], IP@=[arg3]
,NetMsk=[arg4], GW@=[arg5] .
Explanation: This message is for the use case where
a Management Controller IP address and configuration
has been assigned statically using user data.
Internal Event: No
Severity: Info
Alert Category: none
Serviceable: No
CIM Information: Prefix: IMM and ID: 0023
SNMP Trap ID:
Automatically notify Support: No
User response: Information only; no action is
required.
40000018-00000000
LAN: Ethernet[[arg1]] interface
is no longer active.
Explanation: This message is for the use case where
a Management Controller ethernet interface is no longer
active.
Internal Event: No
Severity: Info
Alert Category: none
Serviceable: No
CIM Information: Prefix: IMM and ID: 0024
Advertisement
Table of Contents
