Table of Contents
Advertisement
Riser-card assembly connector
1. Read the safety information that begins on page vii and the "Installation
2. If the system-board tray is installed in a chassis, remove it (see "Removing the
3. Remove the system-board tray cover (see "Removing the system-board tray
4. Pull the PCIe riser-card assembly out of the riser-card slot on the system board.
5. Remove the adapter installed on the PCIe riser-card assembly (see "Removing
6. If you are instructed to return the PCIe riser-card assembly, follow all packaging
Installing a PCI riser-card assembly on the system-board tray
Notes:
1. PCI riser-card brackets must be installed even if you do not install an adapter.
2. You must install a ServeRAID adapter in PCI riser-card assembly 2.
To install a PCI riser-card assembly on the system-board tray, complete the
following steps:
PCI riser-card assembly
guidelines" on page 275.
system-board tray from a 2U chassis" on page 279).
cover" on page 280).
a PCIe riser-card assembly from the system-board tray" on page 302).
instructions, and use any packaging materials for shipping that are supplied to
you.
PCIe adapter
System-board tray
Chapter 5. Removing and replacing server components
303
Advertisement
Table of Contents
