Table of Contents
Advertisement
1. Lower the cover so that the pins at the rear of the cover slide down into the
2. Pivot the cover to the closed position until it clicks into place.
3. Install the system-board tray in the chassis (see "Installing the system-board
Removing a GPGPU enclosure
GPGPU
enclosure
To remove a GPGPU enclosure, complete the following steps:
System-board
tray cover
slots at the rear of the system-board tray. Before you close the cover, make
sure that all components are installed and seated correctly, all internal cables
are correctly routed, and you have not left loose tools or parts inside the
system-board tray.
tray in a 2U chassis" on page 279).
System-board
tray
Release
latch
System-board
tray
Chapter 5. Removing and replacing server components
281
Advertisement
Table of Contents
