Table of Contents
Advertisement
10. Install the system-board tray cover (see "Installing the system-board tray
11. Install the system-board tray in the chassis (see "Installing the system-board
12. Push the power supplies back into the server.
13. Slide the server into the rack.
14. Reconnect the power cords and any cables that you removed.
15. Turn on the peripheral devices and the server.
16. Start the Setup utility and reset the configuration.
17. Either update the server with the latest RAID firmware or restore the
18. Update the UUID (see "Updating the Universal Unique Identifier (UUID)" on
19. Update the DMI/SMBIOS (see "Updating the DMI/SMBIOS data" on page 361).
340
System x iDataPlex dx360 M4 Types 7912 and 7913: Problem Determination and Service Guide
cover" on page 280).
tray in a 2U chassis" on page 279).
v Set the system date and time.
v Set the power-on password.
v Reconfigure the server.
See "Using the Setup utility" on page 345 for details.
pre-existing firmware from a diskette or CD image.
page 359).
Advertisement
Table of Contents
