Table of Contents
Advertisement
Riser-card assembly connector
1. Read the safety information that begins on page vii and the "Installation
2. Touch the static-protective package that contains the PCIe riser-card assembly
3. Install the PCIe adapter, if you removed one (see "Installing an adapter" on
4. Press the PCIe riser-card assembly into the riser-card slot on the system board.
5. Install the system-board tray cover (see "Installing the system-board tray cover"
6. Install the system-board tray in the chassis (see "Installing the system-board
Removing a PCIe adapter from a PCI riser-card assembly
To remove a PCIe adapter from a PCI riser-card assembly, complete the following
steps:
PCI riser-card assembly
1. Read the safety information that begins on page vii and "Installation guidelines"
304
System x iDataPlex dx360 M4 Types 7912 and 7913: Problem Determination and Service Guide
PCI riser-card assembly
guidelines" on page 275.
to any unpainted metal surface on the outside of the system-board tray; then,
remove the PCIe riser-card assembly from the package.
page 305).
on page 280).
tray in a 2U chassis" on page 279).
on page 275.
PCIe adapter
System-board tray
PCIe adapter
Advertisement
Table of Contents
