Table of Contents
Advertisement
2. If a GPGPU enclosure is installed on the system-board tray, remove it (see
3. Carefully set the GPGPU enclosure on a flat, static-protective surface.
4. Remove the hard disk drive filler or the simple-swap hard disk drives, if any is
5. Remove the simple-swap SAS/SATA drive cage (see "Removing a simple-swap
6. Remove retention pin and bracket.
7. Remove the PCIe adapters, if any are installed (see "Removing a PCIe adapter
8. If you are instructed to return the GPGPU enclosure, follow all packaging
Installing a GPGPU enclosure
To install a GPGPU enclosure, complete the following steps.
3.5-inch
filler panel
1. Install the PCIe adapters, if you removed any (see "Installing an adapter in the
2. Install retention pin and bracket.
3. Install the simple-swap SAS/SATA drive cage (see "Installing a simple-swap
4. Install the hard disk drives, if you removed any (see "Installing a simple-swap
5. Install the GPGPU enclosure on the system-board tray (see "Installing a
Removing and replacing Tier 2 CRUs
You may install a Tier 2 CRU yourself or request IBM to install it, at no additional
charge, under the type of warranty service that is designated for your server.
The illustrations in this document might differ slightly from your hardware.
324
System x iDataPlex dx360 M4 Types 7912 and 7913: Problem Determination and Service Guide
"Removing a GPGPU enclosure" on page 281).
installed (see "Removing a simple-swap hard disk drive" on page 293). Place
them on a static-protective surface.
SAS/SATA drive cage" on page 299).
from a PCI riser-card assembly" on page 304).
instructions, and use any packaging materials for shipping that are supplied to
you.
3.5-inch
simple-swap
backplate
3.5-inch
simple-swap
hard disk drive
GPGPU enclosure (PCI slot 3 or slot 4)" on page 306 and "Installing an adapter
in the GPGPU enclosure (PCI slot 1 or slot 2)" on page 308).
SAS/SATA drive cage" on page 300).
hard disk drive" on page 294).
GPGPU enclosure" on page 282).
GPGPU enclosure
Retention pin
Retention bracket
Adapter
Advertisement
Table of Contents
