Table of Contents
Advertisement
6. Lift the air baffle out of the server.
Installing the air baffle
To install the air baffle, complete the following steps.
1. Lower the air baffle into place. Hoop up the HDD cables routing across the
2.
Attention:
For proper cooling and airflow, replace all the air baffles before you
turn on the server. Operating the server with any air baffle removed might
damage server components.
board if applicable.
Make sure the power cable is underneath the air baffle.
SAS/SATA signal cable
SAS/SATA signal cable
Chapter 5. Removing and replacing server components
287
Advertisement
Table of Contents
