Table of Contents
Advertisement
201-819-000 • 201-819-003
Recoverable: No
Automatically notify Support: No
User response: Complete the following steps:
1. Perform the actions mentioned one at a time and try
the test after each action.
2. If the problem remains, contact your
technical-service representative.
3. Turn off the system and disconnect it from power.
Wait for 45 seconds. Reseat DIMM(s). Reconnect it
to power.
4. Make sure that DSA and BIOS/uEFI are at the latest
level.
Date Message Added: 09/04/2012
Reviewed: 09/04/2012
201-819-000 Standalone Memory Test Aborted
Explanation: The start-end address ranges in the
restricted area of the memory.
Internal Event: No
Severity: Warning
Serviceable: No
Recoverable: No
Automatically notify Support: No
User response: Complete the following steps:
1. Perform the actions mentioned one at a time and try
the test after each action.
2. If the problem remains, contact your
technical-service representative.
3. Turn off the system and disconnect it from power.
Wait for 45 seconds. Reseat DIMM(s). Reconnect it
to power.
4. Make sure that DSA and BIOS/uEFI are at the latest
level.
Date Message Added: 09/04/2012
Reviewed: 09/04/2012
201-819-001 Standalone Memory Test Aborted
Explanation: The start-end address ranges in the
restricted area of the memory.
Internal Event: No
Severity: Warning
Serviceable: No
Recoverable: No
Automatically notify Support: No
User response: Complete the following steps:
1. Perform the actions mentioned one at a time and try
the test after each action.
214
System x iDataPlex dx360 M4 Types 7912 and 7913: Problem Determination and Service Guide
2. If the problem remains, contact your
technical-service representative.
3. Turn off the system and disconnect it from power.
Wait for 45 seconds. Reseat DIMM(s). Reconnect it
to power.
4. Make sure that DSA and BIOS/uEFI are at the latest
level.
Date Message Added: 09/04/2012
Reviewed: 09/04/2012
201-819-002 Standalone Memory Test Aborted
Explanation: The start-end address ranges in the
restricted area of the memory.
Internal Event: No
Severity: Warning
Serviceable: No
Recoverable: No
Automatically notify Support: No
User response: Complete the following steps:
1. Perform the actions mentioned one at a time and try
the test after each action.
2. If the problem remains, contact your
technical-service representative.
3. Turn off the system and disconnect it from power.
Wait for 45 seconds. Reseat DIMM(s). Reconnect it
to power.
4. Make sure that DSA and BIOS/uEFI are at the latest
level.
Date Message Added: 09/04/2012
Reviewed: 09/04/2012
201-819-003 Standalone Memory Test Aborted
Explanation: The start-end address ranges in the
restricted area of the memory.
Internal Event: No
Severity: Warning
Serviceable: No
Recoverable: No
Automatically notify Support: No
User response: Complete the following steps:
1. Perform the actions mentioned one at a time and try
the test after each action.
2. If the problem remains, contact your
technical-service representative.
3. Turn off the system and disconnect it from power.
Wait for 45 seconds. Reseat DIMM(s). Reconnect it
to power.
Advertisement
Table of Contents
