Table of Contents
Advertisement
Power cable
Air baffle
3. Install the four screws of the air baffle.
4. Install the top cover (see "Installing the system-board tray cover" on page 280).
5. Install any system-board trays that you removed (see "Installing the
system-board tray in a 2U chassis" on page 279).
Attention:
For proper cooling and airflow, replace all air baffles before you turn on
the server. Operating the server with any air baffle removed might damage server
components.
288
System x iDataPlex dx360 M4 Types 7912 and 7913: Problem Determination and Service Guide
Advertisement
Table of Contents
