Table of Contents
Advertisement
408-901-000 MLNX:MLNX_DiagnosticTestIBPort Test
Failed
Explanation: Port Test Failed.
Internal Event: No
Severity: Error
Serviceable: Yes
Recoverable: No
Automatically notify Support: No
User response: Complete the following steps:
1. Make sure that the physical link of the port under
test in the active state and a subnet manager
running on the fabric to which the port is attached.
2. If these condition was met but the test keeps failing
the port's adapter might be faulty.
3. Try replacing the adapter and repeating the test.
Date Message Added: 09/03/2012
Reviewed: 09/03/2012
201-000-000 Standalone Memory Test Passed
Explanation: Quick/Full Memory Test All CPUs
Passed.
Internal Event: No
Severity: Event
Serviceable: No
Recoverable: No
Automatically notify Support: No
Date Message Added: 09/04/2012
Reviewed: 09/04/2012
201-000-001 Standalone Memory Test Passed
Explanation: Quick/Full Memory Test CPU 1 Passed.
Internal Event: No
Severity: Event
Serviceable: No
Recoverable: No
Automatically notify Support: No
Date Message Added: 09/04/2012
Reviewed: 09/04/2012
201-000-002 Standalone Memory Test Passed
Explanation: Quick/Full Memory Test CPU 2 Passed.
Internal Event: No
Severity: Event
408-901-000 • 201-811-000
Serviceable: No
Recoverable: No
Automatically notify Support: No
Date Message Added: 09/04/2012
Reviewed: 09/04/2012
201-000-003 Standalone Memory Test Passed
Explanation: Quick/Full Memory Test CPU 3 Passed.
Internal Event: No
Severity: Event
Serviceable: No
Recoverable: No
Automatically notify Support: No
Date Message Added: 09/04/2012
Reviewed: 09/04/2012
201-000-004 Standalone Memory Test Passed
Explanation: Quick/Full Memory Test CPU 4 Passed.
Internal Event: No
Severity: Event
Serviceable: No
Recoverable: No
Automatically notify Support: No
Date Message Added: 09/04/2012
Reviewed: 09/04/2012
201-811-000 Standalone Memory Test Aborted
Explanation: Unable to Locate SMBIOS key "_SM_".
Internal Event: No
Severity: Warning
Serviceable: No
Recoverable: No
Automatically notify Support: No
User response: Complete the following steps:
1. Perform the actions mentioned one at a time and try
the test after each action.
2. If the problem remains, contact your
technical-service representative.
3. Turn off the system and disconnect it from power.
Wait for 45 seconds. Reseat DIMM(s). Reconnect it
to power.
4. Make sure that DSA and BIOS/uEFI are at the latest
level.
207
Chapter 3. Diagnostics
Advertisement
Table of Contents
