Assembly - Yamaha VK540EF Service Manual

PRIMARY SHEAVE AND DRIVE V-BELT
4-7
ESS00122

ASSEMBLY

1. Install:
S Sliding sheave (onto the spider)
NOTE:
Be sure the sliding sheave match mark (X) is
aligned with the spider match mark (X).
2. Install:
S Fixed sheave (onto the spider)
NOTE:
Apply LOCTITE to the fixed sheave as shown.
CAUTION:
LOCTITE should be applied only to the
specified area. Never apply it to the bush-
ings and other areas.
a 16 mm (0.63 in)
b 30 X 35 mm (1.18 X 1.38 in)
3. Install:
S Fixed sheave stoppers 1
NOTE:
Stopper tapered portion should face fixed
sheave.
4. Tighten:
S Spider
Tightening steps:
S Finger-tighten the spider until it is stopped by
the fixed sheave stopper.
S Hold the fixed sheave with the clutch spider
separator 1 .
Clutch spider separator:
90890-01711, YS-28890-B
NOTE:
Securely fit the projections on the clutch sepa-
rator adapter 2 into the fixed sheave holes.
POWR
TR