Installation - Yamaha VK540EF Service Manual

Hide thumbs Also See for VK540EF:

Table of Contents

CYLINDER HEAD AND CYLINDER

INSTALLATION

S Reed valves

S Reed valve stoppers

S Place the reed valve 1 with its concave sur-

face facing toward the reed valve seat 2 .

S Fit the reed valve stopper cut a into the corre-

sponding cut b on the reed valve.

S Screws (reed valve) 1

Tighten each screw gradually to avoid warping.

S Gasket (read valve)

S Small end bearing 1

S Piston pin 3

S Piston pin clip 4

S Piston rings

S The arrow a on the piston must point toward

to the front of the engine.

S Before installing the piston pin clip, cover the

crankcase with a clean rag so that you do not

accidentally drop the pin clip and other materi-

al into the crankcase.

S Position each piston very carefully in its origi-

Screws (reed valve) 1 :

1 Nm (0.1 mSkg, 0.7 ftSlb)

Table of Contents