Table of Contents
Advertisement
Chapter 11 Diagonal Measurements
Making Your Measurement
Making Your Measurement
Guide: This information relates to flowchart items 7 through 10 in
Figure 11-1.
1
After you have finished aligning the measurement optics to the diagonal
path to be measured, select Set Up Meas on the Agilent 5530's Set Up
Laser: DIAGONAL screen.
The Set Up Measurement: DIAGONAL screen (Figure 11-12) is displayed.
Figure 11-12. Set Up Measurement: DIAGONAL screen
2
Make any changes to the setup required for your situation, then press
Collect Data.
Measurements Reference Guide
11-31
Advertisement
Table of Contents
