Table of Contents
Advertisement
Chapter 8 Parallelism Measurements
Making Spindle Parallelism Measurements
Figure 8-8. Collect Data: PARALLELISM screen
5
On the Collect Data: PARALLELISM screen, select Reset Position.
This tells the system that the current position of the reflector is the "zero"
point, from which all distances will be measured.
If necessary, use the online help to complete the rest of the fields on this
screen.
6
Move the machine's moveable part to the first measurement point.
7
Select Record.
If you are using the optional remote control unit, press the Record button.
Measurements Reference Guide
8-17
Advertisement
Table of Contents
