Table of Contents
Advertisement
Chapter 10 Way Straightness Measurements
Checking the Alignment for Beam Strength
Checking the Alignment for Beam Strength
To check the alignment for beam strength, follow the instructions in
"Checking the alignment for beam strength" in Chapter 9. However, note
these differences:
•
The Set Up WAY STRAIGHTNESS screen (Figure 10-3) is used
instead of the Set Up Flatness screen. Check this screen for the beam
strength.
•
If you have inadequate beam strength, ensure that the optics are
positioned as shown in Figure 10-2. When you have completed the
Way Straightness Set Up screen, choose Collect Data.
The Collect Data: WAY STRAIGHTNESS screen displays (Figure 10-4).
Figure 10-4. Collect Data: WAY STRAIGHTNESS screen
10-8
Measurements Reference Guide
Advertisement
Table of Contents
