Table of Contents
Advertisement
Chapter 10 Way Straightness Measurements
Setting Up for the Measurement
Setting Up for the Measurement
To set up for the measurement, follow these steps:
1
Follow steps 1 through 5 in "Setting Up for the Measurement" in
Chapter 9.
2
Select Way Strat from the Other Measurements screen.
The Set Up WAY STRAIGHTNESS screen is displayed (Figure 10-1).
Figure 10-1. Set Up WAY STRAIGHTNESS screen
Marking foot spacer intervals
To make measurements along the machine way, you must mark
measurement points, called "stations" on the way. First, choose a
foot spacer for the interferometer. The foot spacer kit includes three
Measurements Reference Guide
10-3
Advertisement
Table of Contents
