Table of Contents
Advertisement
Chapter 10 Way Straightness Measurements
Making the Measurement
Making the Measurement
To make the measurement, follow the instructions in "Making the
measurement" in Chapter 9. However, note these differences:
•
Use the Reset Position and the Record buttons on the Collect Data:
WAY STRAIGHTNESS screen (Figure 10-4) instead of on the Collect
Data: Flatness screen.
•
After you record the last measurement, the Analyze Data: WAY
STRAIGHTNESS screen (Figure 10-5) is displayed. To create a data
file with the measurement data or to update an existing data file,
select Save Data on this screen. Refer to the Agilent 5530 Getting
Started Guide and online help for more information about using this
screen.
Ignore the instructions in "Measuring the remaining lines on the grid" in
Chapter 9.
Measurements Reference Guide
10-9
Advertisement
Table of Contents
