Safety Precautions
WARNING
This section explains the safety precautions when you operate the spinstand.
E5010B HLM-Spindle Stage
When you power on the spinstand, Do Not stick your fingers near the HLM-Spindle Stage
in the following precautionary points.
•
The HLM- Spindle stage is equipped with a terminal guide.
When the stage is moving, DO NOT put your fingers in between the HLM- Spindle
stage and the guide terminal (rubber bushing).
Figure 1-5
Precautionary points (HLM-Spindle Stage guide terminal)
Chapter 1
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Introduction
Safety Precautions
27