Table of Contents
Advertisement
Error Messages of the Auto Disk Alignment
The table below shows the error messages that could appear when Auto Disk Alignment is
performed.
Table B-1
Error Message at Auto Disk Alignment
Error Message
Can't converge the track position
Appendix B
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Error Messages of the Auto Disk Alignment
Description
The starting position is wrong or the X-Y
positioning could be inaccurate. Retry the auto
disk alignment. If it fails again, contact the Agilent
Technologies service center
Error Messages
389
Advertisement
Table of Contents
