Table of Contents
Advertisement
VEE Measurement Program Operation
Measurement
Measurement
After executing the auto configuration, you can now proceed to perform any
measurements. Prior to any measurements you need to specify proper values of the
parameters. Measurements are generally performed automatically. The spindle rotation,
head loading and unloading are also done automatically.
When replacing the head, the head must be at home position and the spindle should not be
rotating. Click the [Return] button of the 'Measure' menu, then click on [Configuration] so
that the head is unloaded. If you use a different type of head or cassette, Click [Spinstand]
> [Cassette Parameter] button to enter the dimensions of the new cassette.
Figure 3-22
Measure Menu
NOTE
When your system equipped with E5037B/C/D, the [Precomp Sweep] button is not
activated as E5037B/C/D does not have a capability of precompensation.
Chapter 3
65
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Advertisement
Table of Contents
