Table of Contents
Advertisement
VEE Measurement Program Operation
Introduction
Introduction
The Agilent E5022/E5023 has a dynamic link library designed to facilitate the control and
measurement programming. The Measurement program has been provided to enable the
user to set, measure and display the results in graphical display easily. It is not necessary to
care about the DLL library because the measurement program controls this.
Agilent E5022/E5023 VEE measurement program is a graphical user interface visual
software, which allows the user to make quick measurements and display the system
settings.
Figure 3-1
Flowchart of VEE measurement program
1. Starting the VEE measurement program. This section explains how to start the VEE
2. Setting the cassette parameters. Before proceeding to measurement the user must
3. Setting configurations. This section explains the necessary parameters to be configured
4. Setting the input range (Auto Configuration). The level of signal output from the media
44
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
measurement program.
specify the size and type of cassette being used.
on the following :
a. Common Parameter Setup
b. Spinstand Setup
Chapter 3
Advertisement
Table of Contents
