Table of Contents
Advertisement
VEE Measurement Program Operation
Measurement
Figure 3-64
Roll Off Narrow Band TAA Menu
Write Current
Sense Current
Track #
Bit Rate Start
Bit Rate Stop
Bit Rate Step
NOP
118
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Specifies the current applied to the write head.
Specifies the current applied to the read head.
Specifies the track number to be tested.
Specifies the starting point of the flux
frequency.
Specifies the stopping point of the flux
frequency.
Specifies the step by which bit rate is
incremented while measuring TAA. When you
specify this parameter, [NOP] will be
computed and updated automatically.
Specifies the number points in measuring
TAA relative to the change in bit rate. When
you specify this parameter, [Bit Rate Step]
will be computed and updated automatically.
Chapter 3
Advertisement
Table of Contents
