Table of Contents
Advertisement
VEE Measurement Program Operation
Measurement
Overwrite Measurement
Overview
This section describes the Overwrite Measurement. This measurement is performed by a
spectrum analyzer.
Measurement
1. To open the Overwrite Selection Menu, click [Overwrite] from the Measure menu.
Procedure
NOTE
Before you execute this measurement, you should set an appropriate input range or execute
the Auto Configuration to set the input range automatically.
2. Click [Overwrite] to open the Overwrite Menu.
Figure 3-115
Overwrite Selection Menu
3. Set the parameters. Click each button to enter a new value.
192
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Chapter 3
Advertisement
Table of Contents
