VEE Measurement Program Operation
Measurement
Standard Triple Track Measurement
Overview
This section describes the standard Triple Track Measurement. This measurement allows
you to evaluate the characteristics of head offset versus TAA.
Measurement
1. To open the Triple Track Test menu, click on the [Triple Track Test] button from the
Procedure
Figure 3-69
Measure Menu
2. Click [Triple Track Test] button to open the Standard Triple Track Test menu.
Figure 3-70
Triple Track Test Menu
3. Set [Program Read Offset] and [Auto TAA Range] check boxes.
126
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Parametric Sweep frame of the Measure menu.
Chapter 3