Table of Contents
Advertisement
Measurement Definition
Parametric Sweep Measurement Definitions
optimized current. The sequence pattern is then read and zero-to-peak voltage is measured.
This process is repeated for higher density of the same pattern until the voltage signal
becomes too small.
The detailed measurement sequence is described in Chapter 3 of the programming manual.
Precompensation Sweep Measurement
Precompensation Sweep is a measurement to observe the special characteristics of NLTS
by 5th harmonic method for sweep values of write precompensation. The write
precompensation value data is set as a delay time from the original transition.
The detailed measurement sequence is described in Chapter 3 of the programming manual.
292
Chapter 5
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Advertisement
Table of Contents
