Table of Contents
Advertisement
Manual Changes
Service Release for Revision A.04.30
Service Release for Revision A.04.30
Changes at Revision A.04.30.07
1) The following head amplifier is supported
* E5029J Opt.701 E5029-66701
Changes at Revision A.04.30.06
1) The following head amplifier is supported
* E5029H Opt.H37 E5022-66537
Bug Fixes
1) In the triple track profile measurement, the auto range was failed when a signal is
detected only at the right side of the track profile measurementt
Changes at Revision A.04.30.05
1) The following head amplifier is supported
* E5029H Opt.H36 E5022-66536
Bug Fixes
1) When the hpe5022_headPosition() function was executed while spindle was not
rotating, the cassette face was not detected properly.
2) In case of Amplifier On Cassettes, the head could not be located at the area over radius
45mm.
Changes at Revision A.04.30.04
1) The following cassette is supported
* E5029D Opt.012 E5010-61321/61322 VM8020 FIC
2) The following cassette's DLL is modified.
* E5029D Opt.002 E5010-61221/61222
3) The function allows you to use an external data source has been added.
* hpe5022_writeDataSource
* hpe5022_writeDataSource_Q
4) The DCR measurement with a Voltage/Power MR bias has been added.
* hpe5022_measureReadHeadDcrEx()
350
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Appendix A
Advertisement
Table of Contents
