Table of Contents
Advertisement
VEE Measurement Program Operation
Measurement
NOTE
The parameter values of Channel Bit Rate, Write Current and Sense Current that have been
set in the [Configuration] menu will automatically update similar parameters in this menu.
3. Click on the [Measure] button to start measurement. Results are displayed after
Measurement
Display
4. Click the [Return] button to return to Measure menu.
See also
See the Chapter 4 "Absolute Polarity Test" on page 254 and also the "Absolute Polarity
measurement function" in Chapter 3 of the programming manual for more details.
98
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Absolute Polarity Pattern
measurement.
The measurement window shows the average TAA, TAA+, TAA- and TAA
Asymmetry for both Isolated Pulse and Tribit patterns. It also shows the computed
absolute polarity in terms of percentage.
allows the user to specify a new data pattern.
Specifies the data pattern defined by the user.
This button becomes active when the [Pattern
Mode] is set to 'User Mode'. When you click
this button a popup window will appear that
allows the user to specify a new data pattern.
Consequently, [Bit Length] will reflect the
specified data pattern.
Chapter 3
Advertisement
Table of Contents
