Table of Contents
Advertisement
5) The function stops the spindle rotation with clamping the media has been added.
* hpe5022_motorStateEx()
Changes at Revision A.04.30.03
1. Supports the following head amplifier.
•
•
2. The maximum number of repeat for multiple write/erase is extended from 1000 to
1000000.
Bug Fixes
1. In case of using the E5029D (Amplifier on casstte type) with the E5012A spinstand,
the auto alignment failed to perform.
Changes at Revision A.04.30.02
1. Supports the following head amplifier.
•
2. Functions control/query the I/O port on the spinstand controller has been added.
Bug Fixes
1. The selftest of the E5040A might fail even the hardware has no trouble.
2. At revision A.04.30.01 and in case of E5010B spinstand, the auto alignment might fail.
Unknown Error [0xbffc0d12] was displayed.
3. The setting menus of the following head amplifiers were not displayed in the VEE
measurement program.
•
•
4. The hpe5022_idn_Q() function did not return the system serial number.
5. The spectrum SNR measurement result at 1MHz RBW on the E5040A was not correct.
Changes at Revision A.04.30.01
1. Supports the following head amplifiers.
•
•
2. Function Applying a MR bias by Voltage/Power has been added.
This function allows you to set a MR bias type at either current, voltage, or power. You
can use at voltage and/or power only if the installed head amplifier has the capability to
select. The function allows you to sweep with the MR bias type(s) also has been added.
3. Position Error Query Function has been added.
This function allows you to monitor the position error (drift).
4. Fine Positioning Additional Settling Time Function has been added.
Appendix A
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
E5029H Opt.H35 E5022-66535
E5029J Opt.702 E5022-66702
E5029J Opt.004 E5022-66004
E5029H Opt.H33 E5022-66533 VM8020
E5029H Opt.H34 E5022-66534 CXA3541N
E5029H Opt.H33 E5022-66533 VM8020
E5029H Opt.H34 E5022-66534 CXA3541N
Manual Changes
Service Release for Revision A.04.30
351
Advertisement
Table of Contents
