Table of Contents
Advertisement
Pattern Configuration Menu
1. Click on [Configuration] > [Setup] > [Pattern Config.] to open the Data Pattern menu.
Figure 3-12
Data Pattern Menu
Specify the number of repetitive periods for each data pattern. Consequently, the
frequency of each data pattern will be computed in 'MHz' based on the specified
repetitive period (i.e. Channel Bit Rate[Bps] / Repetitive Period [nT] / 2). Default
setting can be used for unwanted patterns. Binary pattern is used for user defined
pattern. Use [Load User Pattern] to down load the file that contains user defined data
pattern into the [User Define] parameter. The format of this file should be in text form,
example, FileName.txt. Also, a maximum of only 256 numerical strings can be set with
this parameter. If it goes over 256 numerical strings, you won't be able to change the
set parameter into a new value.
If you change the setting of the "Precomp Status" frame, it will automatically change
and update similar parameters in "Precompensation Setting" menu.
Chapter 3
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
VEE Measurement Program Operation
Setup Menu
57
Advertisement
Table of Contents
