Table of Contents
Advertisement
Manual Changes
Changes at Revision A.02.1x from Revision A.02.0x
Changes at Revision A.02.1x from Revision A.02.0x
•
Extension Head Load Configuration is added.
•
Popcorn Measurement is added.
•
The definition of SNR measurement has changed. Inputting the noise level reference is
required.
•
The baseline parameter is deleted from the parametric measurement.
•
Program Read Offset function is added on the TAA Track Profile and Triple Track
Profile measurement. (This function is in VEE Demo Program only.)
•
Auto TAA Range function is added on the TAA Track Profile and Triple Track Profile
measurement.
•
Meas. Type function is added for TAA, PW, Baseline, Waveform Analysis, Narrow
band TAA and SNR measurements.
•
The triple track profile measurement is changed as follows
•
Performing the three track erase process is selectable.
•
The value of OTRC Write Pos. is changed from the absolute value to the ratio value
of write track width.
•
Band Erase Configuration Menu is added.
378
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Appendix A
Advertisement
Table of Contents
