Table of Contents
Advertisement
Changes in Revision B.01.00 from Revision A.04.30.03
1. Supports E5023A System.
The system calibration (Cable-loss compensation) function has been added. The
calibration factor is installed in PC. The value is stored into PC at the factory shipment.
The value is the same for all systems as far as the provided cables are used. Generally
user don't care about this.
2. Supports E5029K head amplifier.
The method to set the head amplifier control has been changed. In case of the
E5029H/J, the head amplifier property method is adapted. In case of the E5029K, users
can set the values at any register in the head amplifier IC. This allows users to control
the head amplifier more flexible.
Appendix A
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Changes in Revision B.01.00 from Revision A.04.30.03
Manual Changes
349
Advertisement
Table of Contents
